The front, or nose, of a kayak is the bow; stern means the rear. The hull is the bottom, and the deck is the top. Tracking is a boat’s ability to stay in a straight line. A rudder is a device at the stern that can help steer and track; Perception describes foot control, while REI says its pedal-kayak rudder uses a hand control. In REI’s terminology, a skeg is a retractable fin that helps keep side wind from pushing a kayak off course.1,2 Look up other terms alphabetically, including aliases. Category labels can vary by maker: REI says one brand’s “recreational” kayak may be comparable to another’s “day touring” kayak.2
Key Takeaways
- Check the maker’s wording before comparing category labels or capacity figures.
- Look up a term by its main name or the alias shown beside it.
- Follow the linked guide when you need more than a definition.
- Ask the maker what a capacity figure includes before using it to calculate a load.
Compare the wording before you compare boats
| Term | What the named source means | What to check |
|---|---|---|
| Recreational | REI describes these kayaks as affordable, stable, easy to enter and exit, and simple to turn.2 | REI says they’re for flatwater or meandering rivers, not longer trips, waves, or rapids. Compare the maker’s intended use; another brand may use a different category name. |
| Day touring | REI calls these versatile boats sleeker and more efficient to move than recreational boats.2 Northwest Outdoor Center places light touring kayaks, sometimes called day touring kayaks, between recreational and touring kayaks.3 | Check the features and intended use the maker lists. |
| Touring / sea kayak | REI uses “touring kayak” for sit-in sea kayaks.2 | Check the maker’s category and the boat’s features. |
| Weight capacity | REI’s figure includes the boat, paddler, and gear. Old Town distinguishes “Total Weight Capacity,” which includes assembled parts and standard items, from “Usable Weight Capacity,” its recommended weight for performance, handling, and safety.2,4 | Check what the maker’s figure counts and whether it describes buoyancy or a recommended operating load. Do not assume labels from different makers use the same accounting. |
Glossary
B
Back band / back rest — Perception’s ACA-partnership glossary describes this as support for your lower back while paddling. See kayak seats and foot braces.1
Beam (width) — Eddyline uses “Width/Beam” on a product specification, treating the words as alternate labels. Olympic Outdoor Center defines width as the kayak’s measurement at its widest point. REI says wider hulls offer more initial stability, while narrower hulls can go faster.2 See kayak length and width.5,6
Bow — The front end of a kayak, according to Perception’s ACA-partnership glossary. See kayak hull shapes explained.1
Bulkhead — Perception defines a bulkhead as a crosswise wall inside a kayak. Perception says crosswise bulkheads create watertight compartments for buoyancy and storage.1 Lake Superior Magazine says a recreational kayak designed for inland waters might have only one bulkhead.7 NRS also documents “bulkhead” as a name for adjustable padded foot-support plates or shaped foam blocks. Check which meaning a specification uses. See kayak hardware and hatches for the dividing-wall meaning, or kayak seats and foot braces for foot support.1,8
C
Carbonlite — Eddyline’s name for its proprietary layered plastic material. See kayak materials compared.5
Carbonlite 2000 — In a 2020 article, Eddyline used this name for kayaks it said were thermoformed rather than rotomolded.9 See kayak materials compared.9
Chine — NRS defines the chine as the line where the bottom and sides of a boat join. See kayak hull shapes explained.8
Cockpit — Perception’s glossary describes the cockpit as the enclosed central space where you sit in a kayak. See kayak cockpit size and fit.1
Coaming (cockpit rim) — The rim around a kayak cockpit. Perception uses “coaming” for this rim. See kayak cockpit size and fit.1
Composite — Perception describes composite kayak construction as layered fiberglass or Kevlar material. REI describes fiberglass kayaks as lightweight and carbon-fiber kayaks as ultralight, with a large increase in performance and price.2 See kayak materials compared.1
D
Deck — The top part of a kayak. Perception’s glossary says it helps keep water from filling the hull. See kayak hardware and hatches.1
Deck rigging (deck lines, bungees, toggles) — Lines, elastic cords, and toggles fitted on the deck. Perception describes them as adding safety and convenience for some types of paddling. See kayak hardware and hatches.1
Denier — A measure of the mass of yarn used in fabric: NRS defines denier as the weight in grams of 9,000 meters of yarn.10 It describes yarn mass, not the thickness of the finished fabric. See inflatable kayak construction.10
Depth — Olympic Outdoor Center defines kayak depth as the measurement from the lowest point in the hull up to the deck. See kayak length and width.6
Freeboard — Xplora Watercraft defines this as the side height from the waterline to the deck. See kayak length and width.(Xplora Watercraft)
Displacement hull — NRS describes this hull type by its continuously curved profile and cross-section—the shape seen when looking across the hull. See kayak hull shapes explained.8
Drop-stitch — Sea Eagle’s RazorLite manual describes drop-stitch as many strong threads connecting the top and bottom fabric layers. See inflatable kayak construction.11
F
Feathering / offset — Aqua Bound uses these terms for paddle blades set at an angle to each other instead of in line. See paddle feathering explained.12
Ferrule — The joint where two sections of a kayak paddle meet in the shaft.12 See how to choose a kayak paddle.
Footpegs / foot braces — Perception calls these adjustable supports inside the cockpit for your feet. See kayak seats and foot braces.1
G
Gear track / accessory rail — Brooklyn Kayak Company describes gear tracks, also called accessory rails, as fittings attached to the sides of a kayak to hold accessories.13
H
Hard chine — Eddyline describes a hard chine as a more angled meeting of a kayak’s bottom and side. See kayak hull shapes explained.5
Hatch — The opening used to store gear. Perception distinguishes a hatch, which is an opening, from a bulkhead, which is the wall sealing a compartment. See kayak hardware and hatches.1
Hull — Perception describes the hull as the bottom part of a kayak, beneath the deck. See kayak hull shapes explained.1
I
Inflatable kayak — REI describes inflatable kayaks as boats that save storage space, as folding kayaks do. See inflatable kayak construction.2
Initial stability (primary stability) — Olympic Outdoor Center describes initial stability as how stable a boat sits flat on the water. NRS uses “primary stability” for the relative stability of a boat sitting upright and level. See kayak stability explained.6,8
K
Kayak — Paddle Australia describes kayaks as normally having a deck and being paddled with a two-bladed paddle while the paddler sits inside an enclosed cockpit.14
L
Length (overall) — Olympic Outdoor Center defines overall length as the distance from bow to stern. Waterline length is the kayak’s length along the waterline, which may differ from its overall length. See kayak length and width.6
M
Maneuverability — Perception defines this as a boat’s ability to turn precisely. See kayak hull shapes explained.1
MirageDrive — Hobie’s name for its pedal drive system. Its Outback manual describes pedals that move fins. See kayak types explained.15
P
Paddle blade — The broad part at the end of a paddle, according to Perception’s glossary. See how to choose a kayak paddle.1
Paddle shaft — The long, narrow part of a kayak paddle. See how to choose a kayak paddle.1
Paddler — Scotland’s Using Inland Water Responsibly guide defines a paddler as a person who uses a paddle to propel a craft such as a canoe, kayak, or raft.16
Paddling / paddled — In the American Heritage Dictionary’s boating sense of paddle, paddling means moving a watercraft with a paddle, and paddled is the past-tense form.17
Pedal propulsion — REI describes pedal kayaks as using either bike-like pedals that turn a propeller or push pedals that power fins. See kayak types explained.2
Planing hull — NRS describes this hull as having a flat bottom, with the sides rising from it at a defined angle. NRS says planing hulls tend to be wider at the waterline and thus provide more primary stability.8 In flat, motionless water, NRS says a planing-hulled boat is harder to flip than a displacement-hulled boat.8 NRS says rounded displacement hulls plow through the water, while flat planing hulls plow at rest or when paddled very slowly and skim to the surface when given speed.8 See kayak hull shapes explained.8
Polyethylene / HDPE — HDPE is high-density polyethylene, a plastic used to make kayaks. See kayak materials compared.1
Primary stability — See initial stability.
R
Recreational — See the comparison table above. Category labels can vary by maker. REI describes crossover boats for flowing and still water as short recreational kayaks, typically with a skeg that helps them turn when raised and track straight when lowered.2 See kayak types explained.2
Rudder — A device at the stern that can help steer and keep a kayak on course. Perception describes foot control, while REI says its pedal-kayak rudder uses a hand control.1,2
RAM-X — Pelican’s name for its proprietary multi-layer polyethylene material. See kayak materials compared.18
Rotomolding — A process for forming a kayak by placing powdered resin into a two-part mold. Pakayak describes conventional rotomolding as producing a kayak’s hull and deck in one continuous piece without seams or bonded joints.19 See kayak materials compared.9
Rocker — NRS defines rocker as the curve along the bottom of a boat from bow to stern. NRS says continuous rocker reduces how much of the hull touches the water, allowing quicker turns and greater maneuverability.8 See kayak hull shapes explained.8
S
Scupper / self-draining — REI says scupper holes allow sit-on-top kayaks to drain. Pelican says its scupper plugs help you stay dry, especially when your kayak is heavily loaded.20 See sit-in vs. sit-on-top kayak.2
Skeg (REI terminology) — A retractable fin that helps keep side wind from pushing a kayak off course. Some makers use “skeg” for a removable fin, so check the maker’s wording.2,11 Seaward’s composite kayak manual describes a sliding control knob for deploying and retracting its skeg.21
Tracking fin (REI terminology) — A fin that helps a kayak stay on course but cannot be retracted while paddling; it can be removed before paddling.2
Secondary stability — NRS says secondary stability comes into play when a boat is turned onto its side. See kayak stability explained.8
Sit-in / sit-inside — REI contrasts the protection of a traditional sit-in kayak with the open design of a sit-on-top. See sit-in vs. sit-on-top kayak.2
Sit-on-top / SOT — Perception describes a sit-on-top as a kayak without a cockpit, usually designed to drain itself. See sit-in vs. sit-on-top kayak.1
Soft chine — Olympic Outdoor Center describes a soft chine as a smooth, curved transition from the kayak’s side to its bottom. Olympic Outdoor Center says soft-chine kayaks tend to have greater secondary stability and less primary stability.6 See kayak hull shapes explained.6
Spray skirt / sprayskirt — A neoprene or nylon skirt worn by the paddler and attached to the cockpit rim, according to Perception. See kayak cockpit size and fit.1
Stability — Perception defines this as a boat’s general ability to resist tipping under normal conditions. See kayak stability explained.1
Stern — The rear end of a kayak, according to Perception’s ACA-partnership glossary. See kayak hull shapes explained.1
T
Tandem — REI uses this term for a kayak designed for two paddlers. See tandem kayak buying guide.2
Thermoforming — Eddyline describes thermoforming its Carbonlite material by heating each laminate sheet until it becomes pliable. See kayak materials compared.5
Thigh / knee braces — Perception describes these as cockpit contact points that help you control the boat. NRS says thigh hooks transfer movements from your knees and lower thighs to the boat so you can lift or dip its edges.8 See kayak seats and foot braces.1
Tracking — Perception defines tracking as a boat’s ability to stay in a straight line. See kayak hull shapes explained.1
Trim — Perception defines trim as how level a kayak sits from bow to stern, which affects boat control. Pyranha says moving the seat forward or backward shifts your weight and changes the kayak’s trim, with the ideal trim also depending on how much gear you carry.22 See kayak weight capacity explained.1
Day touring — See the comparison table above. See kayak types explained.2
V
Vantage CTW — Hobie’s name for a seat used with its Outback kayak. Hobie lists the Mirage Outback’s capacity as 425 pounds (192.78 kilograms) and its Vantage CTW seat capacity as 275 pounds (124.74 kilograms).23 See kayak seats and foot braces.15
V-shaped hull — Eddyline describes a V shape as functioning like an integral rudder. See kayak hull shapes explained.5
Volume — NRS uses this term for the kayak’s inner capacity, usually measured in gallons. Dagger’s 2015 catalog lists the Mamba 8.1’s volume as 77 gallons (292 liters).24 Volume and weight capacity are different terms; check kayak weight capacity explained for the latter. See kayak types explained for more on boat volume.8
W
Weight capacity — See the comparison table above. Check kayak weight capacity explained for more detail. Ask the maker what its figure includes before calculating how much you can load.
Width — The distance across a kayak at its widest point, as defined by Olympic Outdoor Center. See also beam. See kayak length and width.6
Terms with brand-specific or differing meanings
Some terms depend on who uses them. REI’s category labels are one example; its “recreational” and “day touring” descriptions are not universal definitions.2 A removable fin that Sea Eagle calls a “skeg” may be called a tracking fin elsewhere. REI distinguishes a tracking fin from a skeg by whether it can be retracted while paddling, while Sea Eagle’s manual uses “removable skeg” for its own RazorLite fin.2,11
A “bulkhead” may refer to a compartment wall or, in NRS’s terminology, a foot-support plate or foam block. Check the surrounding specification for clues, then use the relevant hardware and hatches guide or seats and foot braces guide.1,8
What this glossary leaves out
This page focuses on terms buyers are likely to meet on a spec sheet. It leaves out whitewater slang such as “eddy,” “ferry,” “boof,” and “hydraulic,” along with stroke names, because those terms concern paddling technique rather than basic specification lookup. It also leaves out wet-exit and rescue steps, navigation rules, and personal flotation device requirements; use the relevant instruction and safety guides for those topics.
Some older glossary terms are also omitted: keyhole cockpit, cathedral/tunnel/pontoon hull equivalence, accessory-rail compatibility. For more on boat categories, materials, fit, construction, and hull shape, visit the fit and buying guide.
Footnotes
-
https://www.confluenceoutdoor.com/pages/perception-faq ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8 ↩9 ↩10 ↩11 ↩12 ↩13 ↩14 ↩15 ↩16 ↩17 ↩18 ↩19 ↩20 ↩21 ↩22 ↩23 ↩24 ↩25 ↩26
-
https://www.rei.com/learn/expert-advice/kayak.html ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8 ↩9 ↩10 ↩11 ↩12 ↩13 ↩14 ↩15 ↩16 ↩17 ↩18 ↩19 ↩20 ↩21
-
https://oldtownwatercraft.johnsonoutdoors.com/us/frequently-asked-questions ↩
-
https://eddyline.com/pages/manufacturer_coc_rsl-pdf ↩ ↩2 ↩3 ↩4 ↩5
-
https://www.olympicoutdoorcenter.com/pages/boat-design-features-to-meet-various-paddling-conditions ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7
-
https://www.lakesuperior.com/lifestyle/recreation/382-kayaking-safely-on-lake-superior/ ↩
-
https://www.nrs.com/learn/kayak-terminology-beginners-guide ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8 ↩9 ↩10 ↩11 ↩12 ↩13 ↩14
-
https://eddyline.com/blogs/news/technology-and-innovation-in-the-production-of-lightweight-kayaks ↩ ↩2 ↩3
-
https://www.nrs.com/star-pike-inflatable-fishing-kayak/p2yd ↩ ↩2
-
https://www.seaeagle.com/img/PDF/HullInstructions/RL.pdf ↩ ↩2 ↩3
-
https://www.aquabound.com/blogs/resources/kayak-paddle-feathering-what-it-and-why-does-it-matter ↩ ↩2
-
https://brooklynkayakcompany.com/blogs/our-blog-2/what-are-kayak-gear-tracks ↩
-
https://media.hobie.com/digital_assets/Outback_Manual_2021.pdf ↩ ↩2
-
https://www.outdooraccess-scotland.scot/sites/default/files/2018-09/Guidance%20-%20For%20All%20Water%20Users%20-%20Using%20inland%20water%20responsibly.pdf ↩
-
https://www.confluenceoutdoor.com/blogs/news/ram-x-material-explained ↩
-
https://pakayak.com/what-is-rotomolded-kayak-construction/ ↩
-
https://www.confluenceoutdoor.com/collections/bestsellers-confluence-outdoor/products/pelican-scupper-plugs-for-kayak-pack-of-4-medium-ps1949?variant=45527273505069 ↩
-
https://www.pyranha.com/ConnectC4S_outfitting_instructions_web.pdf ↩
-
https://media.pelicaninternational.com/m/1205a9bb7b60744/original/2015.pdf ↩