Kayak fishing

Fish Finders on a Kayak: Sonar, Transducer Mounts and Safe Power

Use these starting rules:

  • If you want to move the equipment between boats, choose a portable bundle. Garmin’s listed portable kit combines a carrier, battery, charger, cable storage and suction-cup mount.1
  • If you prefer a phone display, consider STRIKER Cast. It sends sonar readings to the STRIKER Cast app, and Garmin permits tethering it behind a kayak.2 Choose the GPS version if you want to record your own contour maps; recording requires that version.2
  • If the equipment will stay with one kayak, start with its built-in mounting provision. Hobie’s installation manual covers Lowrance Ready plates and Guardian mounts; Wilderness Systems provides a recessed transducer location on the Tactical Pro 128.3,4
  • If you want detailed charts before exploring unfamiliar water, choose a chart-capable package and confirm coverage. Lowrance’s EAGLE manual describes preloaded cartography and chart cards.5 Garmin’s STRIKER Vivid manual says its Quickdraw Contours feature lets you “instantly create maps with contours,” and the 7sv page describes waypoint marking.6,7
  • If depth readings, underwater structure and saved fishing locations would not change your fishing, postpone the purchase. Start without a fish finder and revisit the decision when you can name the function you need.

Choose the screen and mapping together

Our advice: for a first installation, plan the position for a 4- or 5-inch screen, the smaller sizes in Garmin’s list above. Move to a larger display if you intend to compare several sonar views at once. Garmin’s STRIKER Vivid manual supports full-screen views and combinations of two or more views.6

Check the whole housing against your available space. Garmin lists the STRIKER Vivid 7sv housing at 9.3 × 5.5 × 2.3 inches (23.5 × 14.0 × 5.8 centimeters).7 Make a cardboard outline and try it from your normal fishing position before ordering a mount.

SetupScreen and controlsSonarLocation and mapping
Garmin STRIKER Vivid 7sv7-inch (17.8-centimeter) display; button controlsTraditional CHIRP, ClearVü and SideVü with a compatible transducerGPS, waypoints, routes and Quickdraw recording with 1-foot (0.3-meter) contours6,7
Garmin ECHOMAP UHD2 6/7/9 sv6-, 7- or 9-inch (15.2-, 17.8- or 22.9-centimeter) diagonal displays; Garmin’s kayak guide describes touchscreen operation with keyed assistTraditional CHIRP, ClearVü and SideVü frequencies, dependent on transducerGarmin’s kayak guide lists maps; specifications include a microSD card slot1,8
Lowrance EAGLE 7 or 97- or 9-inch (17.8- or 22.9-centimeter) display; keypad controlsInstallation guide lists SplitShot or TripleShot transducers; SideScan requires a supporting TripleShot model and transducerGPS positioning, preloaded-cartography options and chart cards5
Garmin STRIKER CastYour mobile device, using the STRIKER Cast appScrolling sonar view and flasherGPS models record Quickdraw contours; models without GPS can download community contours2

A waypoint is a saved location; a contour is a line joining equal depths. Choose waypoints if your priority is marking a productive spot or launch. Choose a chart-capable unit if you want mapped detail available before making your own passes.

For the STRIKER Vivid 7sv, Garmin lists storage for up to 2 million acres of Quickdraw maps with 1-foot (0.3-meter) contours.7 Treat recorded contours and purchased charts as separate buying decisions.

Garmin warns that a STRIKER Vivid navigation course may cross land or shallow water and instructs you to use visual sightings to avoid hazards.6

Choose sonar for what you want to see

Sonar uses sound to detect underwater objects. The transducer is the sensor that sends and receives those sound signals.

Traditional sonar gives you a scrolling view of detected objects and their depths; Garmin’s illustrated view identifies fish or suspended targets and the bottom.6 Start here if your main aim is following depth and locating targets below you.

CHIRP sweeps each pulse through a range of frequencies.6 Garmin describes better target separation in deep water, including distinguishing individual fish within a school.6 Choose it as your starting traditional-sonar capability.

Down-looking imaging (Garmin ClearVü): Garmin says this beam “provides a clearer, picture-like image of what is beneath the boat.”6 Add it if identifying the shape of what you pass over matters to your fishing.

Side imaging, called SideVü by Garmin and SideScan by Lowrance, shows objects beside the boat.6,5 Choose it when searching to either side is a priority, then resolve its mounting requirements before buying the display.

Depth and range figures belong to a particular transducer or system. Garmin’s transducer guide lists the GT52HW-TM at 800 feet (244 meters) for traditional sonar, 500 feet (152 meters) for ClearVü and 500 feet (152 meters) for SideVü.9 For STRIKER Cast, Garmin states a sonar depth range from less than 2 feet to 150 feet (less than 0.6 meter to 45 meters).2

For deeper-water plans, check the exact combination: Garmin’s ECHOMAP UHD2 specifications explicitly make depth performance dependent on the transducer, salinity, bottom type and other water conditions.8

Match the transducer mount to your exact kayak

A scupper is a drainage passage through a kayak. A transducer scupper or recess is a designated mounting location; do not assume an ordinary drain accepts your chosen sensor.

Start by identifying your kayak’s model, year and mounting system. Then match the transducer model and mounting-kit part number.

Scupper mounts and built-in plates

Hobie’s Fish Finder Power Kit: Hobie Kayaks w/ Transducer Cavity manual shows a transducer attached to the underside Lowrance Ready plate, with its cable fed through the scupper.3 Some transducers require extension tabs or adapters, and side-imaging installations on Passport or Lowrance Ready kayaks require an aftermarket plate.3

For side imaging, that manual lists Lowrance Ready accessory plate 72020220 for TripleShot and 72020207 for TotalScan; Passport 12 uses 72026219 for TripleShot and 77800048 for TotalScan.3 Match the named sensor rather than choosing a plate solely by kayak brand.

BerleyPro publishes these additional fit combinations:

BerleyPro mountListed kayak fitMounting provision
BP265201Pre-2019 Outback; Pro Angler 12/14 with original scupper design; Compass; Revo 13/16; Adventure and Tandem IslandOriginal Lowrance Ready transducer scupper10
BP265202Hobie Lynx and Passport 12Lynx/Passport transducer scupper10
BP2652032019-and-later Outback; Pro Angler 12/14 Guardian modelsGuardian transducer scupper10
BP3306Vibe Makana 100 and Sea Ghost 110/130Rectangular transducer scupper10

BerleyPro’s UNI TRANS compatibility list includes Garmin GT51/52/54/56, Lowrance Active Imaging HD 3-in-1 and Humminbird XM9 transducers.10 Confirm your full transducer designation and kayak version before ordering.

On the Wilderness Systems Tactical Pro 128, the transducer recess sits along the hull’s centerline toward the front of the standing area.4 Its two molded-in 10-32 inserts accept mounting brackets, with adapter 8080069 listed when the transducer bracket does not fit.4 The manual routes the cable through the scupper at the front of the recess and into a deck-mounted through-hull wiring plate.4

External arm or portable suction mount

Choose an external arm when you want an adjustable installation independent of a molded transducer recess. Scotty’s 141 includes a track and Gear-Head adapter; its arm extends from 11.5 to 18 inches (29.2 to 45.7 centimeters) and swivels through 360 degrees.11 The optional Scotty Universal Sounder Mount is separate.11

For Garmin’s portable suction-cup arrangement, the Portable Mount Installation Instructions specify mounting on the side or bottom of the boat and aligning the transducer parallel with the waterline.12 Check the mounting surface and deployed position before committing to that arrangement.

See Fishing Kayak Rigging for tracks and display-mount choices.

Shoot-through versus through-hull

A shoot-through, or in-hull, transducer stays inside the hull and sends its signal through the hull material. Garmin’s kayak in-hull mount avoids drilling, protects the transducer from rocks during launching and avoids catching vegetation, but introduces some signal loss.9 Garmin recommends a flat section for sealing and excludes metal and wooden vessels from this kayak-mount recommendation.9

Choose this route only after confirming the mount, hull material, transducer and desired sonar modes with the maker. Before gluing, obtain the installation instructions for that exact mount.

A true through-hull transducer occupies a hole drilled through the hull.9 Keep this distinct from a cable passing through a sealed wiring fitting. Choose a true through-hull installation only with a maker-approved combination and its installation manual; otherwise return to the designated scupper mount or external arm.

Choose power by the named unit and kit

For an installation without an external battery, STRIKER Cast has a built-in rechargeable lithium-ion battery, a stated typical runtime of 10 hours and an approximate charging time of 1.5 hours.2 Use those as planning figures, and plan your phone’s power separately.

For a wired setup, choose the battery package and charger together. Hobie’s Fish Finder Power Kit lists a 12-volt Nocqua 10-amp-hour Pro Power kit and battery holder.3 Garmin’s Portable Mount Installation Instructions say the device uses a user-replaceable sealed lead acid battery, and to “only charge the battery with the included charger.”12 Follow the instructions supplied with the exact battery package you buy.

For a longer trip, ask the battery and fish-finder makers to confirm usable runtime for your display and settings before selecting capacity. Do not treat amp-hours alone as a promised trip duration.

Fuse and wiring requirements

Keep each unit’s electrical specifications attached to its model:

  • Garmin STRIKER Vivid 5/7/9: the installation diagram shows a 12-volt direct-current supply and a 3.0-amp inline fuse on the positive battery lead.13 The STRIKER Vivid owner’s manual specifies a 3-amp, 250-volt fast-acting fuse.6
  • Lowrance EAGLE 7/9: the installation guide specifies a nominal 12-volt direct-current supply, an operating range of 10.8–18 volts and a recommended 3-amp fuse.5 Its wiring diagram places the inline fuse in the positive lead.5
  • Garmin portable mount: its installation manual connects the red positive connector to the positive battery terminal and the black negative connector to the negative terminal.12

Use the named installation guide and cable label when checking the fuse holder and connections.

For Hobie’s power kit, the manual specifies waterproof wire connectors and heat-shrink protection, and directs charging and maintenance to the Nocqua instructions inside the box lid.3 Before crimping or heating connections, read its complete “Connect the power cable” section alongside the fish finder’s wiring instructions.

Garmin’s portable-kit manual requires disconnecting the device’s power leads before charging and prohibits charging in an unventilated area or gas-tight container.12

Check placement, cables and water protection

Position the display from the seat, then rehearse a paddle stroke, pedal operation, rod movement and access to storage. Include enough room behind the screen: Garmin specifies 4⅝ inches (118 millimeters) to the nearest rear obstruction for ECHOMAP UHD2 6/7/9 sv units.8

For compatible Hobies, the power-kit manual locates the battery holder on the internal accessory/sail tube or at a suitable 8-inch (20.3-centimeter) Twist and Seal hatch lip; it notes that some hatch locations are incompatible.3 Plan storage around that access, using Crates, Coolers and Tackle Storage for the broader layout.

Before drilling, read the exact kayak and display installation instructions. Lowrance’s EAGLE 7 & 9 Installation Guide requires checking the reverse side of surfaces before drilling or cutting.5 Hobie’s power-kit manual puts the transducer cable’s thru-hull plug on the vertical fire wall above the transducer scupper hole on the Mirage Compass, and in front of that hole, in the molded depression on the deck, on the Mirage Passport 12.3

For cable cleanup, Hobie instructs you to bundle excess transducer cable, use light zip-tie tension and secure the bundle; cutting the cable or overtightening ties can impair operation.3 Garmin also requires STRIKER Vivid connectors to be pushed firmly into their sockets.6

Water ratings apply to the named component. Garmin rates STRIKER Vivid displays IPX7 and defines that as incidental water exposure up to about 3.3 feet (1 meter) for up to 30 minutes.6 STRIKER Cast itself is listed as floatable and IPX7.2

Do not extend a display’s rating to its separate transducer, battery or enclosure. Ask for the enclosure’s rating with your intended cable exits fitted. Garmin’s portable-kit manual explicitly prohibits submerging its battery, and the Cast manual requires drying the device completely before charging.12,2

Where next

Finish your parts list with the display, exact transducer, matching mount, battery package, charger, specified fuse and cable fittings. Count the complete package when checking fishing-kayak capacity, and use the kayak-fishing safety kit guide for your wider equipment decisions.

Footnotes

  1. https://www8.garmin.com/marine/system_builder/Kayak.pdf ↩ ↩2 ↩3

  2. https://www8.garmin.com/manuals/webhelp/GUID-333762A2-4D98-4BBB-93EE-FD0970D1B378/EN-US/STRIKER_Cast_OM_EN-US.pdf ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7

  3. https://s3-us-west-1.amazonaws.com/media.hobie.com/item_attachments/FF_Install_Kit_w_Lithium_Pro_Power_72020145_REV_210204.pdf ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8 ↩9

  4. https://media.pelicaninternational.com/m/667f2c616f41d724/original/Wilderness-System-Tactical-Pro-128_OM.pdf ↩ ↩2 ↩3 ↩4

  5. https://lowrance.co.za/download/eagle-7-9-installation-guide/?wpdmdl=18250 ↩ ↩2 ↩3 ↩4 ↩5 ↩6

  6. https://www8.garmin.com/manuals/webhelp/GUID-C3C9935A-44AD-4A64-8690-B6176625C6BC/EN-US/Striker_Vivid_OM_EN-US.pdf ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8 ↩9 ↩10 ↩11 ↩12

  7. https://www.garmin.com.hk/products/onthewater/striker-vivid-7sv/ ↩ ↩2 ↩3 ↩4

  8. https://www8.garmin.com/manuals/webhelp/GUID-B4327979-40C0-487D-8117-A36D7AD0FA51/EN-US/GUID-1B7F4A59-CABA-434D-92BC-FD0D4FF2A636.html ↩ ↩2 ↩3

  9. https://static.garmincdn.com/shared/nordic/catalogs/Garmin_EMEA_Transducer_Selection_Guide_2025.pdf ↩ ↩2 ↩3 ↩4

  10. https://berleypro.com/pages/berleypro-kayak-transducer-mounts ↩ ↩2 ↩3 ↩4 ↩5

  11. https://scotty.com/product/141-transducer-mount/ ↩ ↩2

  12. https://static.garmin.com/pumac/Portable_fishfinder_Install_ML.pdf ↩ ↩2 ↩3 ↩4 ↩5

  13. https://static.garmin.com/pumac/STRIKER_Vivid_5_7_9_install.pdf ↩