Care and transport

Kayak Care by Material: Poly, Thermoform, Composite

For Old Town polyethylene boats, wash with mild soap and water and avoid paste wax. Eddyline Carbonlite should be rinsed and washed; Eddyline warns against acetone, other strong solvents, and ammonia-based cleaners, while Delta warns against strong solvents and advises against 303 on its Solarkote-finished kayaks. For Wilderness Systems PRO fiberglass or Kevlar, superficial damage can be treated with rubbing compound followed by polishing compound; after impact, inspect inside for fine white lines that may indicate a resin fracture.1,2,3,4,5

Key Takeaways

  • Identify your kayak’s maker, model, and material before cleaning or treating it.
  • Use a maker’s stronger cleaner or polish only for the surface and problem it names.
  • Inspect the areas your maker identifies, especially after an impact or before use when its manual says to.
  • Match a repair to the maker’s material-specific instructions; contact the maker or dealer when it directs you to.
  • Use the linked storage and winterizing guides for those topics.

The hull is the boat’s main body. Ultraviolet (UV) light comes from the sun. Cleaning and repair advice can differ even between boats made from similar materials, so the examples below apply to the named maker and product. P&H recommends keeping polyethylene kayaks away from direct sunlight and heat sources to avoid distortion from overheating; winterizing a kayak gives the storage precautions.

Maker and materialRoutine cleaning and stubborn marksProtection or treatment
Old Town polyethylene (a plastic hull material), Superlinear, Royalex and fiberglass boatsMild soap and water; Old Town also names Murphy’s Oil Soap for exterior cleaning.1Old Town names protectant products sold for vinyl surfaces, such as Armor All, 303 Products, or Pledge, for the exterior. It advises against paste wax because white residue can highlight scratches. Keep protectant and polish off the interior floor, which may become slippery.1
Eddyline CarbonliteRinse, then use soap to remove scum, a dirty film or residue on the hull; rubbing alcohol is for stubborn stains. Eddyline’s FAQ says never to use acetone, other strong solvents, or ammonia-based cleaners on Eddyline kayaks;3 its care article also names toluene, MEK, and lacquer or paint thinner for Carbonlite 2000.2Eddyline’s care article describes plastic polish and a wax-like finish for cosmetic work on its boats.2
Delta Solarkote-finished kayaksWash with a soft cloth or sponge and warm soapy water. Delta says not to use strong solvents—chemicals such as acetone or lacquer thinners.4Delta names Novus Polish or a similar polish for minor scuffs and abrasions. It advises against using 303 Protectant on its boats.4
Sea Eagle inflatable boatsHose off between uses as needed. Sea Eagle names Simple Green and 3M Marine Cleaner & Restorer.6For a Sea Eagle boat left outside, its FAQ recommends an unnamed vinyl UV protectant every three weeks.6

These are maker-specific examples, not interchangeable approvals. For instance, Old Town names 303 for its boats, while Delta advises against it on Delta boats.1,4

Polyethylene: clean gently, then inspect

If you use the boat frequently in salt water, Old Town says to rinse it after every use.1

After impacts, P&H advises checking its polyethylene kayaks for dents or changes in shape, deep scratches, splits, and whitening. On its triple-layer models, also look for wear or punctures that expose the foam core. P&H says to inspect bulkhead seals periodically; a bulkhead is an interior wall that separates a compartment from the rest of the boat.7

For small punctures or splits in a P&H polyethylene kayak, P&H offers plastic welding rods with instructions.7 It directs owners to a dealer for other repairs.7 Follow the instructions for your boat and repair materials; for repair procedures, see kayak repair by material.

Thermoform: follow the finish instructions

The advice here is specific to Eddyline Carbonlite and Delta Solarkote-finished boats. Eddyline warns that eraser sponges may dull its kayaks’ glossy finish. Eddyline’s FAQ permits mild solvents such as isopropyl or denatured alcohol for stubborn marks and adhesive removers for decal residue on its kayaks.3 Eddyline recommends Mer-Maid Boat Wash with Carnauba Wax for cleaning and waxing its kayaks at the same time.3 Eddyline warns that freezing water can stress glue joints and seams; dry the kayak before storage as described in winterizing a kayak.3

Eddyline’s care article also gives a cosmetic polishing sequence using Meguiars #10 plastic polish followed by a wax-like Yacht Brite “Serious Shine” finish. For gouges, Eddyline specifies filling the damage with Devcon Plastic Welder; the repair reaches full strength in 24 hours.2, 2

Delta names Armor All Original spray or wipes only for hard-to-fit Press-Lock hatch seals, a type of seal on Delta hatches. For a bulkhead or deck-seam leak, Delta names Devcon Plastic Welder or a urethane marine sealant.4

Check the fittings and surfaces your maker calls out, including the four-point self-rescue bungees behind the cockpit, which Eddyline says to maintain in good condition. Eddyline says to check that nuts are secure and that the deck around bolt insertion points does not show unusual wear. Clear sand and debris from hatch covers and rims so they can seal. Eddyline recommends treating its hatch covers with UV protectant at least once a year, more often in very sunny regions or when you store your kayak outdoors.3 If your Eddyline kayak has pedal rails, hose sand or mud out to prevent abrasion and sticking. Delta advises checking deck lines and rudder cables regularly for wear and replacing worn parts.2,4

Composite: separate cosmetic scratches from deeper damage

Composite boats use layers of material such as fiberglass or Kevlar. A gel coat is the outer surface finish on some composite hulls. Gold Eagle lists 303 Aerospace Protectant as suitable for use on gel coat, fiberglass and carbon fiber.8 For Wilderness Systems PRO fiberglass or Kevlar models, the manual says cosmetic scratches or superficial damage can be treated with rubbing compound followed by polishing compound. This advice is for those composite models: the same manual says not to sand or use abrasive rubbing compound on its polyethylene boats.5

After a collision, Wilderness Systems says to inspect the inside of the hull near the damaged area. Fine white lines that mirror the outside damage may indicate a resin fracture, a break in the resin inside the hull. Its manual says a resin fracture may require a composite repair kit from a Wilderness Systems dealer; gel-coat repair kits are also available for more extensive repairs. P&H advises checking composite kayaks after bumps or scrapes, including both sides near bulkheads and areas where use may have worn away gel coat on the hull beneath the heel area or along the keel. Contact a P&H dealer for composite repair advice, materials, or professional services.5,7 For its wooden boats, Chesapeake Light Craft says to repair a deep scratch or abrasion immediately if it may have penetrated the fiberglass and epoxy, before water can damage the wood.9

For salt-exposed Wilderness Systems boats, rinse the hull and the rudder, rudder cables, and footbraces with fresh water. Its manual names 303 Protectant for UV protection and says it can be applied lightly to hatch tops, seats, and plastic buckles and straps. 5 For its epoxy-coated wooden boats, Chesapeake Light Craft says to keep the wood sealed and protect the epoxy from sunlight with varnish.10

Inflatable PVC or Hypalon: check the boat’s instructions

For Sea Eagle inflatables, dry the boat completely before packing it overnight or for a season.6 Advanced Elements’ FAQ says to hose its kayaks with fresh water and let them air dry before extended storage; it also permits soft liquid soap or a diluted solution of Simple Green for cleaning.11 For its inflatables, NRS advises cleaning and inspecting the boat after each use and recommends coating it periodically with 303 Protectant.12

PVC and Hypalon are different materials used for inflatable hulls, and their repair adhesives are not interchangeable. Polymarine, for example, says its Hypalon Inflatable Boat Adhesive is not for use on plasticised PVC and points to its 3026 PVC Adhesive instead.13 See kayak materials compared to help identify your material, then check your maker’s manual. The Sea Eagle Explorer manual directs owners to inspect for leaks and check recessed valves for tightness. If a leak remains, it describes using soapy water on the chamber to find it. For punctures, open the valve and let the boat deflate before patching. The manual specifies PVC patches and PVC glue from the repair kit, and says to wait at least 24 hours for the glue to set before inflating.14 It also says never to use a heat gun and to contact Sea Eagle for extensive repairs. Use the manual for your model and the instructions for its adhesive. The Sea Eagle Explorer manual says repairs on its boats need a PVC based glue.14

NRS says its Inflatable Boat Cleaner is safe for Pennel Orca, Hypalon, PVC, and urethane boat materials. Its instructions are to wet the surface, apply the cleaner, and let it sit for up to one minute before scrubbing and rinsing.15 Do not let it stand on painted or varnished surfaces, and work in a ventilated area. NRS recommends 303 Protectant semi-annually after cleaning, such as before and after storing an inflatable. 15

Hypalon care and repair can depend on the boat and its construction. Feathercraft’s care page says its welded urethane skins need no additional treatment and should be cleaned with mild detergent and a soft brush. For its Hypalon hull repairs, Feathercraft specifies rubber cement or glue made for Hypalon, with the area clean and dry. Ask your inflatable’s maker for its cleaning and UV instructions, and use its repair directions for your exact material.16

Folding boats: follow the model manual

The Oru Lake uses a single sheet of double-layered polypropylene for its assembled hull and deck. Its manual says, “DO NOT use or fold your Oru Kayak in air temperatures below freezing (32°F/0°C).”17 Its manual says to inspect the kayak before each use and make sure the screws are tight. Rinse it with fresh water after use, especially after saltwater paddling. For additional cleaning, Oru permits general-purpose cleaning spray with a soft, non-abrasive rag or sponge. To drain water from its corrugations—channels formed in the folded material—unfold the kayak and turn it upside down. For serious damage or punctures, contact Oru with photos and the hull identification number.17 Its manual says to store the Oru Kayak in its box form, indoors, away from direct sunlight and heat sources.17

Feathercraft identifies its newer hulls as urethane-coated woven nylon fabric; older hulls may use Hypalon, Feathertex, or Butyl rubber, so identify your skin before choosing care. Inspect seams, hatches, spray skirt, rudder, and hull before every trip. Let the skin dry fully on the frame before packing. Rinse the frame tubes with fresh water, and use Boeshield T-9 on the frame’s spring buttons and inserts and to wipe salt deposits from the frame. Follow Feathercraft’s separate repair instructions for the actual skin material.16

After-use cleanup and drying for hard-shell kayaks

The National Park Service advises cleaning away from storm drains and other bodies of water, using a brush or sponge to remove all visible plant material, animals, and mud.18

For hard-shell watercraft, the National Park Service says to move the boat to a dry location and place it on its side, or tilt and lift it, to drain excess water.18 The National Park Service also advises sponging or toweling off lingering water, especially in areas that cannot drain.18

Where to go next

For material differences, see kayak materials compared. For repair procedures, use kayak repair by material. See how to store a kayak for storage, winterizing a kayak for seasonal preparation, and how long a kayak lasts for service-life context. The care and transport guide links to the wider topic.

Footnotes

  1. https://oldtownwatercraft.johnsonoutdoors.com/us/frequently-asked-questions ↩ ↩2 ↩3 ↩4 ↩5

  2. https://eddyline.com/blogs/news/kayak-care-and-repair ↩ ↩2 ↩3 ↩4 ↩5 ↩6

  3. https://eddyline.com/pages/faqs ↩ ↩2 ↩3 ↩4 ↩5 ↩6

  4. https://www.deltakayaks.com/wp-content/uploads/2018/10/2018-delta-kayaks-owners-manual.pdf ↩ ↩2 ↩3 ↩4 ↩5 ↩6

  5. https://media.pelicaninternational.com/m/410782ee41ef26bc/original/WS_14_Owners_Manual.pdf ↩ ↩2 ↩3 ↩4

  6. https://www.seaeagle.com/Faq ↩ ↩2 ↩3

  7. https://phseakayaks.com/kayak-care-and-maintenance.php ↩ ↩2 ↩3 ↩4

  8. Wayback Machine copy captured July 10, 2026 of https://www.goldeagle.com/product/303-aerospace-protectant/ ↩

  9. https://clcboats.com/blogs/boatbuilding-tips/refinishing ↩

  10. https://clcboats.com/blogs/boatbuilding-tips/wooden-boat-maintenance-refinishing ↩

  11. https://confluenceoutdoorcanada.com/pages/faq-help/ ↩

  12. Wayback Machine copy captured April 16, 2026 of https://www.nrs.com/learn/inflatable-boat-use-care-instructions ↩

  13. Polymarine, Hypalon Inflatable Boat Adhesive use guide: https://www.polymarine.com/pdfs/Polymarine-Hypalon-Adhesive-Use-Guide.pdf ↩

  14. https://www.seaeagle.com/img/PDF/HullInstructions/EX.pdf ↩ ↩2

  15. https://www.nrs.com/inflatable-boat-cleaner/pchv ↩ ↩2

  16. https://www.feathercraft.com/care-repair ↩ ↩2

  17. https://cdn.shopify.com/s/files/1/0182/8165/files/2022_Lake_OwnersManual_Web.pdf?v=1655836433 ↩ ↩2 ↩3

  18. https://www.nps.gov/dino/learn/nature/aquatic-invasive-species.htm ↩ ↩2 ↩3