Use these rules to narrow your choice:
- If you want to keep using an existing seat, establish the canoe’s hull shape first. Nova Craft says paddling a symmetrical canoe from the bow seat facing the stern can achieve the same weight-positioning effect as its kneeling thwart.1
- If you want a kit, compare the complete contents. Northstar includes hardware with its thwart; Valkyrie lists a thwart, two hanging blocks, bolts, nuts and washers.3,4 Ask which parts suit your canoe before ordering.
- If you want to avoid cutting and drilling, consider a fitted option. Valkyrie’s kit requires cutting to suit the location and drilling a bolt hole, while Hou offers workshop installation.4,5
- If your feet become trapped or your exit is restricted, stop using that arrangement. Clipper’s Owner’s Manual explicitly warns against kneeling in a canoe that restricts your exit.6
- If you are a beginner, make instruction part of the plan. The American Canoe Association’s Beginner’s Guide recommends lessons from an ACA-certified instructor and says beginning canoeists should never paddle alone.7
What a kneeling thwart does
A kneeling thwart is a crossbar arranged to support a kneeling paddling position. The American Canoe Association (ACA) describes thwarts as crosspieces running between the gunwales—the canoe’s upper side edges—and says some are spaced and constructed for kneeling on the canoe bottom.7
The position changes where you paddle from. Nova Craft installs its kneeling thwart between the stern seat and the yoke, moving the solo paddler’s weight toward the center of a tandem canoe.1 The stern is the rear; the bow is the front.
That placement relates to trim: how level the canoe sits from front to back. Clipper describes trimming a canoe as setting it to ride level in the water, and its sliding seat allows adjustment for paddlers of different weights.6 Treat the thwart’s proposed location as part of the seating arrangement for your particular canoe.
A kneeling thwart can provide a dedicated solo station without adding a full seat: Northstar describes its contoured model in those terms.3 Swift likewise presents its kneeling thwart as a solo-paddling option for tandem canoes.2
Keep the carrying yoke distinct from the paddling support. Clipper’s manual says its portage yoke is designed to carry the canoe’s weight during overland carrying and must not be used as a seat, citing stability and possible yoke damage.6
Start with the canoe and your preferred position
Before choosing hardware, identify your canoe’s model, construction and existing fittings. Send those details to the canoe maker or proposed fitter, along with your intended solo use.
Nova Craft distinguishes between symmetrical and asymmetrical hulls: it describes the reversed bow-seat approach for symmetrical canoes and recommends a kneeling thwart for asymmetrical ones.1 Use that distinction to decide which arrangement to discuss with the maker.
Comfort also changes the choice. Swift offers a wide center seat as a solo option for paddlers who find kneeling uncomfortable.2 Clipper says many of its models are designed for sitting rather than kneeling.6 Start with a seated option if that matches how you want to paddle.
Ordinary canoe seats also come in different forms. Wenonah lists hung web seats, sliding bucket seats and floor-mounted or low-hung web seats across its trim packages.8 When describing your existing arrangement to a fitter, identify the actual seat and mounting style rather than calling every crosspiece a thwart.
Compare the thwart, hangers and hardware
Hangers or drops are the pieces that suspend the support below the canoe’s upper edges. Compare them along with the crossbar itself.
| Maker and option | Dimensions supplied | Construction or angle | Included parts or fitting |
|---|---|---|---|
| Northstar Contoured Kneeling Thwart | 36 inches wide (91.4 centimeters) | Laminated construction with walnut drops | Hardware included.3 |
| Valkyrie Kneeling thwart kit | About 35.4 inches total width (90 centimeters); cross-section about 3.74 by 0.87 inches (95 by 22 millimeters) | Ash, Mahogany, Cherry or Walnut; hanger available horizontal or at 22 degrees | Thwart, two hanging blocks, stainless steel bolts, nuts and washers; cutting and drilling required.4 |
| Hou fitted kneeling thwart | Angled support positioned for the kneeling paddler | Workshop installation; standard position 15.5 inches (39.4 centimeters) behind the yoke.5 |
Treat the listed width as one comparison point. Ask the maker to confirm the fit at the intended mounting position, including the mounting surfaces and hardware.
Valkyrie supplies its thwart drilled at one end and says it must be cut down to suit the location, then drilled for the bolt; the hangers arrive pre-drilled.4 Choose that route only if you are prepared to have the fitting work completed.
Northstar also offers separate walnut kneeling drops, canted slightly forward and drilled on 8-inch centers (20.3 centimeters).3 If you are replacing drops rather than buying a complete assembly, give the maker your existing hole spacing and support details.
Keep the material choice tied to the complete assembly. Compare the required angle, hanger arrangement and supplied fasteners before choosing the wood finish.
Position, height and installation
Start with the instructions for the actual product and canoe. Swift’s Kneeling Thwart Installation sheet specifies a position 19 inches (48.3 centimeters) behind the center of the yoke or thwart, whereas Hou’s fitted product has a standard position 15.5 inches (39.4 centimeters) behind the yoke.9,5 Keep each measurement attached to its maker’s arrangement.
Swift’s sheet covers the position of the hanging-block centers, drilling and both angles of the blocks.9 It specifies that the blocks’ longer edges face inward, drawing the kneeling thwart away from the canoe sides, and that the lowered edge of the thwart slopes toward the bow.9
For a Swift installation, use the complete Kneeling Thwart Installation sheet. For another product, obtain that maker’s fitting instructions before cutting or drilling. Ask for fitting help if you cannot confidently identify the mounting position or block orientation.
Height deserves the same attention as fore-and-aft placement. Hou describes setting its fitted thwart’s height and angle for clearance and paddling, and invites contact about specific fitting requirements.5 Take that opportunity to discuss your footwear, preferred kneeling position and available space.
Clipper’s manual warns that raising a seat raises the paddler’s center of gravity and requires kneeling more often.6 If you are considering changes to an existing seat, have the maker assess the whole arrangement.
Check the consequences for carrying, too. Swift notes that adding a kneeling thwart may affect the yoke’s balance.9 Its removal guidance is conditional: the thwart can be removed for gear space only when another thwart is unnecessary or an existing one is already in place.9 The ACA explains that thwarts help the canoe retain its shape.7 Ask the canoe maker to identify which crosspieces must remain before planning any removal.
Comfort, foot clearance and getting out
Separate knee padding from the fit of the support. The ACA lists a kneeling pad as an optional comfort item and specifies nonabsorbent, waterproof foam.7 Swift offers adhesive closed-cell foam knee pads ½ inch thick (1.3 centimeters).2
If pressure on your knees is the problem, consider padding. If kneeling itself remains uncomfortable, return to the seated alternatives rather than continuing to alter the thwart.
Footwear belongs in the fit discussion. The ACA warns that bulky shoes are cumbersome under canoe seats and can compromise swimming, and suggests lightweight, low-profile watersport footwear.7 Bring the footwear you intend to paddle in when discussing the arrangement with the fitter or instructor.
Ask the maker to confirm the required clearance for your setup. Take questions about entering, changing position and exiting to an instructor before using an unfamiliar arrangement on a trip.
What beginners should establish before paddling
Use the fitting discussion to identify what you need to learn. The ACA recommends instruction and says equipment should suit your body, skill level and setting.7 Ask an instructor to assess your kneeling position and help you prepare for a capsize in that canoe.
Choose and wear the life jacket as part of that preparation. The US Coast Guard advises wearing a Coast Guard-approved life jacket or buoyancy aid on the water and states that a recreational vessel must carry an approved wearable personal flotation device for each person aboard.10 For a correctly worn foam-filled jacket, the Coast Guard describes a snug fit that prevents it from rising above the wearer’s chin or ears.10
Prepare for the actual water. The Pennsylvania Fish and Boat Commission advises getting a forecast, knowing the waterbody and being prepared to swim; it says not to paddle if the water looks too hazardous to swim in.11 Its guidance also calls for a float plan describing the boat, equipment, crew and departure and arrival times.11
Kneeling has a limited place in that decision. Pennsylvania advises kneeling to increase stability before entering rougher water such as a rapid, while the ACA’s self-rescue guidance says to stay within your abilities and have a plan for capsizing.11,7 Discuss the intended conditions with your instructor before choosing where to use the setup.
The National Weather Service advises checking the forecast before boating, being ready to head to shore quickly and stopping activities when lightning occurs or weather looks threatening.12 Make those weather checks part of the trip decision.
For capsize preparation, the ACA recommends rescue training and a plan for getting to safety and obtaining help.7 Ask your instructor which recovery skills and equipment suit your canoe and intended water.
Your purchase decision can now be specific: keep the existing seat arrangement, choose a dedicated kneeling station, or request a fitted seated alternative. Before ordering, settle the canoe compatibility, complete fitting requirements and preferred paddling position. Before launching, resolve clearance and exit concerns and establish the skills needed for the trip.
Footnotes
-
https://www.novacraft.com/buyers-guide/our-options/ ↩ ↩2 ↩3 ↩4
-
https://www.northstarcanoes.com/accessories/kneeling/ ↩ ↩2 ↩3 ↩4
-
https://www.houcanoes.com/shop/sbo-006-fitted-kneeling-thwart-828 ↩ ↩2 ↩3 ↩4
-
https://www.clippercanoes.com/pages/owners-manual ↩ ↩2 ↩3 ↩4 ↩5 ↩6
-
https://americancanoe.org/wp-content/uploads/documents/sei-educational_resources/beginners_guide_aca.pdf ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8
-
https://swiftcanoe.com/wp-content/uploads/2019/09/kneeling-thwart-installation.pdf ↩ ↩2 ↩3 ↩4 ↩5
-
https://www.uscgboating.org/recreational-boaters/life-jacket-wear-wearing-your-life-jacket.php ↩ ↩2
-
https://www.pa.gov/agencies/fishandboat/boating/paddlesports/safety ↩ ↩2 ↩3